img

DA25

The small precision dual-spindle CNC lathe DA25 adopts the structure design of dual-spindles arranged in parallel and dual independent tool holders. The tool holder is fixed in the middle of the machine tool. The dual-spindles can independently move the X axis and Z axis according to the program to realize tool change and machining advancement. Provides automatic exchange of workpieces clamped by the main and auxiliary shafts. This model can solve the problem of two-sequence machining of the clamping end of the workpiece under one clamping. It has the characteristics of convenient tool arrangement and adjustment, rapid tool change and time saving, high positioning accuracy, and high production efficiency. At the same time, various forms of automatic loading and unloading mechanisms can be integrated on the machine tool to realize unmanned automatic processing.

Performance Characteristics
Technical Parameter
Typical Parts
Processing Video
  • 1.Reasonable machine tool structure design

    256757188120362308.jpg

    One end of the workpiece clamped can be machined for twice, in this way the machining precision can be guaranteed and the machining efficiency can be improved as well.

    High degree of standardization and better universality of cutting tools.

  • 2.guide

    1.png

    The movable shafts are equipped with dovetailed slide rail structure that is featured by high rigidness, long lifespan, easy adjustment, better stability and reliability.

  • 3.Main and counter shaft structure

    IMG_0865.JPG

    Spindle and sub-spindle are driven by AC servo motor, and the oil heat exchanger is equipped for cooling to achieve high speed and high precision of the spindle.

    The machining cooling unit, moving along with the spindle and sub-spindle, is provided at spindle and sub-spindle side independently.

  • 4.Positive and negative operation

    cp_xntd_xkncda25_4@2x.pngThe machine tool is provided with the front and back sliding door and capable of coordinating turning of operation station, therefore, it can be operated at two directions, namely at front and at back of the machine tool.

  • 5.Advanced system control

    6.png

    The FANUC 0i-TD dual channel system is adopted for synchronous and mixed control of shafts among routes;

    The automatic operation station adopts 8.4 inch color LCD touch screen, and integrates servo shaft, spindle, hand-wheel shaft, built-in PLC and USB interface, and CF CARD readout system, featuring by east operation and high reliability;

    The automatic software controller adopts WinCE operating system to enhance applications of network and USB, and give full play to unique advantage of PC-based controller.

  • 6.Various automatic loading and unloading mechanism design

    cp_xntd_xkncda25_6_1@2x.png

    圆盘式储料器disk stocker

    cp_xntd_xkncda25_6_2@2x.png

    matrix stocker

    cp_xntd_xkncda25_6_3@2x.png

    vibrating disk stocker

    cp_xntd_xkncda25_6_4@2x.png

    high-speed automatic loading and  unloading robot

    cp_xntd_xkncda25_6_5@2x.png

    Wide part conveyor

    The automatic loading and unloading mechanism for various lathes is designed subject to customer’s workpiece to be machined.

  • 7.Arrange processing procedures more reasonably

    cp_xntd_xkncda25_7_1@2x.png

    Improvement of the productivity

    cp_xntd_xkncda25_7_2@2x.png

    Easy management and saving labor cost

    cp_xntd_xkncda25_7_3@2x.png

(1)机械本体标准规格MACHINE SPECIFICATIONS

项目Item

参数Parameter

主轴/副轴加工能力Spindle/Sub-spindle Machining capability

最大加持外径Maximum clamping diameter

Ф100mm

主轴/副轴Spindle/Sub-spindle

主轴形式Spindle form

AC伺服电主轴AC servo electic spindle

通径Diameter

Ф25

最高转速Maximum speed

MAX.8000r/min

冷却方式Cooling mode

油热交换机Oil exchange

Cs轴Cs AXIS

最小指令单位Minimum travel increment

0.0001°

最大空转速度Maximum idle running speed

36000deg/min

最大进给速度Maximum idle feeding speed

1000deg/min

快进速度Rapidly travel

X1/X2轴X1/X2-axis

最大移动速度Maximum Traveling speed

15m/min

行程travel

350mm

功率Power

1.2KW

Z1/Z2轴Z1/Z2-axis

最大移动速度Maximum Traveling speed

15m/min

行程travel

120mm

功率Power

1.2KW

电气总容量Required electric power

15KVA

油箱Oil tank

140L

主轴中心高度Height from floor to spindle center

1076mm(地脚38mm)1076mm(Foundation bolt :38mm)

机械手Robot

控制方式Control mode

NC数控 NC numerical control

控制轴数Controlled axis

3轴(可扩展)3 axis(extendable)

XL轴行程XL-axis travel distance

600mm

YL轴行程YL-axis travel distance

500mm

ZL轴行程ZL-axis travel distance

900mm

XL轴最大移动速度XL-axis maximum traveling speed

20m/min

YL轴最大移动速度YL-axis maximum traveling speed

90m/min

ZL轴最大移动速度ZL-axis maximum traveling speed

90m/min

XL伺服电机功率XL-axis servo motor power

0.4KW

YL伺服电机功率YL-axis servo motor power

0.75KW

ZL伺服电机功率ZL-axis servo motor power

0.75KW

最小移动量Minimum amount of movement

0.001mm

装卸零件最大重量Maximum weight of parts handled

0.5kg

装卸零件最大尺寸Maximum dimension of parts handled

Ф100

其它Etc.

总电气容量Required electric power

15KVA

机床尺寸(长*宽*高)Floor space

2050*1750*2330mm

机床重量Mass of machine

约2600kg

*项目值可能存在差异,此处仅作参考Note: value of item may vary for     different scheme, the value here is only for reference

(2)CNC装置标准规格CNC UNIT SPECIFCATIONS

项目Item

参数Parameter

控制系统Control unit

FANUC 0i TD双通道FANUC 0i TD dual channel

控制轴数Controlled axis

同时控制4轴Simultaneously controllable 4axis

输入方式Input system

MDI键入、绝对/增量编程MDI keyboard input、combined use of absolute/incremental programming

程序记忆容量Part program storage length

512KB

插补机能

直线插补、圆弧插补、极坐标插补、圆柱插补Linear interpolation、pyramidal interpolation、Circular interpolation、threading interpolation

最小设定单位Minimum Setting

0.0001mm

最小移动单位Minimum Travel Setting

X轴 X axis

0.0005mm 

Z轴  Z axis

0.001

Cs轴Cs axis

0.0001°

刀具补偿设定Tool offset

64组

刀具位置补偿Cutting tool position compensation

形状补偿Shape compensation

±99999.9999

磨损补偿Wear compensation

±9.9999

辅助机能Auxiliary functions

M2、S4、T4

手动移动倍率Manual travel rate

0.2/0.1/0.01/0.001mm

停顿时间Dwell time

0~99999.999s

工进倍率Feed rate override

0~150%

快进倍率Rapid traverse override

F0、25、50、100%

输入输出接口Input/Output interface

RS232C

显示语言Display language

中文、英语、日语Chinese、English、Japanese

(3)其它规格OTHER SPECIFICATIONS

单一固定循环循环功能(G90,G92,G94)Canned cycles

动态图形显示功能(特配)Dynamic graph display function

可编程数据输入(G10)Programmable data input

登陆程序个数(400个)Number of logged program

第二辅助功能(B<

 

 



VIEWO LIST

  • Figure

    产品介绍

    https://cdn.nagashima-seiko.com/uploads/20211116/ce4f8558d7515722417be05abcff4e67.mp4
  • Figure

    DA25样件加工-内四方接头

    https://cdn.nagashima-seiko.com/uploads/20241128/5c495202150083ebc58bfeb9d8380dd4.mp4
imh
Navigation Bar
img
img