100GL
The 100GL series is a small precision automated CNC lathe developed by combining many years of CNC machine tool design experience and cutting-edge science and technology from Xi'an Kitamura. It has the characteristics of low cost and space saving, and is known for its high rigidity and high precision. It is most suitable for precision automated processing of high-quality small parts. XKNC-100GL is based on XKNC-100G (Φ25), equipped with a high-speed automatic loading and unloading manipulator and automatic stocker device, which can be widely used in the automatic processing of discs and bushings of machine tools and unmanned operations in the production line. . It can realize the synchronous operation of cutting parts and automatically grabbing blanks, thereby improving the efficiency of production and processing. Install CS function, can also realize the precision machining of curve or curved surface contour.
1.Modular servo manipulator

Servo manipulator YL axis , ZL axis , adopts modular design concept, realizes automatic loading and un-loading fast assembly . Servo manipulator designs equipped with position adjustment device, it can realize X axis direction manipulator whole body adjust. And also can fast adjust the manipulator according to different workpiece in the machine tool positions like side of machining area, side of storage device and un-loading device.
2.Dovetail sliding guide

X-axis guide rail adopts the high quality cast iron with quenching, grinding and scraping treatment, which will prolong the precision retaining period of the guide ail surface and keep the stable Precision of machine tool for a long time.
3.Double mountain sliding guide

Z-axis adopts the double-V-shape sliding guide rail which can meet the rigid requirement, and the automatic machining with large working range.
4.High-precision spindle

The shafts are made of quality material meterial and have been subjected to multiple heat treatments and exquisite machining,The bearings adopt original precision bearings from japan ,The waterproofs adopt special high lever waterproof rings from German.

Special configuration can be used built-in motorized spindle,XKNC-50G built-in motorized spindle has a rated spindle speed of 8000rpm and adopts oil heat exchanger in cooling, ensures high speed and high accuracy of the spindle. It is suitable for workpiece machining with high requirements of accuracy and surface smooth finish. And it increases the production efficiency vastly.
5.Reasonable gang tool structure

The machine is equipped with the proper mutation structure and sufficient tool installation space The precise machining tools for drilling, thread tapping, internal boring, turning Radial drilling threading and cutting can be installed in the tool post.
6.General control system

Take standard as general control system, design humanization interface, accord with operating habits. System can back to zero, single move, manual (continuous and dynamic), automatic and multiple operating modes, can meet the functional requirements of machine tool, manipulator in different states.

The system has the function of safety protection for the operation of the manipulator. Manipulator can only work in nominated area which reduce the damage to machine tool due to the operate by error. System modules have the power to keep the function to ensure the safety of processing data, The YL axis uses the gravity shaft motor with the brake to avoid the fall of the shaft caused by the excessive brake action time.
7.safe and stable

Automatic production efficiency stable which will not fluctuate due to operator reasons. It can prevent workpiece failure and other potential problems due to operator tired. During the Machine tool production, operator can test all the key positions accuracy and settings, turnover, does not need specific person to handle which reduced the working procedures. The machine decreases the working abilities and labor, and further reduce and labor cost, Enhance the enterprise image and prepare for the future equipment improvement.
8.A variety of automation equipment options

Multi-layer blank parts storage device

Matrix blank parts storage device

Disc blank parts storage device

Vibrating blank parts storage device

Loading/Un-loading device

Phase detecting device

Wide-belt part transferring device
Multi-layer blank parts storage device, Matrix blank parts storage device, Disc blank parts storage device, Vibrating blank parts storage device, etc. Loading/Un-loading device, Phase detecting device. Wide-belt part transferring device.
9.A variety of automatic clamp opening and closing and clamping device options

The shift type clamping mechanism

power chuck

The air rotary cylinder

S type strong collect chuck clamping mode

The pneumatic rotary cylinder
10.Dovetail special tool holder base plate

Adopt the same measurement with 20G design, can use the 20 Gang type standard tool holders, it increased the tools quantity the maximum can install 9 tools.
(一)100G技术参数Technical Parameters | ||
(1)机械本体标准规格MACHINE SPECIFICATIONS | ||
项目Item | 100G参数 100G Parameter | |
加工能力Capacity | 床身上最大回转直径Swing over bed | Ф320mm |
刀座底板上回转直径Swing over cross slide | Ф160mm | |
最大加工直径Max. machining diameter | Ф125mm | |
最大加工长度Max. machining length | 100mm | |
主轴Spindle | 主轴速度Spindle speed | MAX.6000r/min |
主轴通孔直径Through hole diameter | Ф25mm | |
回转速度变换Number of speed ranges | 无级Step-less | |
主轴中心高度Height from floor to spindle center | 900mm | |
弹簧夹头柄径Spring collet shank diameter | Ф26mm | |
快进速度Rapidly travel | X轴快进速度X-axis rapid traverse | 15m/min |
Z轴快进速度Z-axis rapid traverse | 15m/min | |
行程Stroke | X轴移动量X-axis travel | 320mm |
Z轴移动量Z-axis travel | 270mm | |
电机Motors | 主轴电机Spindle servo motor | 3.7/5.5 KW |
进给轴(X/Z)电机Feed servo motors | 1.2KW | |
其它Etc | 总电气容量Required electric power | 8KVA,AC200V±10%,50Hz |
机床尺寸(长×宽×高)Floor space | 约2300x1600x2300mm | |
机床重量Mass of machine | 约2300kg | |
(2)CNC装置标准规格CNC UNIT SPECIFCATIONS | ||
控制系统Control unit | FANUC 0i mate TD | |
控制轴数Controlled axis | 同时2轴(X/Z)、手动1轴 | |
Simultaneously controllable 2axis, 1axis in manual mode | ||
输入方式Input system | MDI键入、绝对/增量编程 | |
MDI keyboard input、combined use of absolute/incremental programming | ||
程序记忆容量Part program storage length | 640M(256KB) | |
插补功能Interpolation function | 直线、圆弧、极坐标 | |
Linear interpolation、pyramidal interpolation、Circular interpolation、threading interpolation | ||
最小设定单位Minimum Setting | X:0.0001mm(直径dia.) Z:0.0001mm | |
最小移动单位Minimum Travel Setting | X:0.0005mm Z:0.001mm | |
切削进给速度Feed rate | 1~10000mm/min | |
刀具补偿设定Tool offset | 64组64 Group | |
辅助机能Auxiliary functions | M2、S4、T4 | |
停顿时间Dwell time | 0~99999.999s | |
工进倍率Feed rate override | 0~150% | |
快进倍率Rapid traverse override | F0、25、50、100% | |
输入输出接口Input/Output interface | RS232C/Memory Card | |
显示语言Display language | 中文、英语、日语Chinese、English、Japanese | |
(3)其它规格OTHER SPECIFICATIONS | ||
循环功能(G90,G92,G94)Canned cycles | 异常负荷检出功能Unexpected disturbance torque detection | |
英制/公制转换Inch/metric conversion | 图形演示功能Graphic function | |
多重循环功能(G70-G76)Multiple repetitive cycles | 可编程数据输入(G10)Programmable data input | |
背景编辑Background editing | 恒表面切削速度控制Constant surface speed control | |
加工时间,加工数量表示Run hour and parts count display | 第二辅助功能(B代码)G code system B | |
钻孔固定循环(G80-G89)Canned cycles for drilling | 图形对话输入Conversational programming with graphic function | |
圆柱补偿(G107)Cylindrical interpolation | 螺纹加工回退Threading retract | |
变螺距螺纹车削(G34)Thread Cutting | 显示软盘程序目录Directory display of floppy cassette | |
宏指令Custom macro | 工件坐标系(G52-G59)Workpiece coordinate interpolation | |
*由于产品不断更新,产品规格如有变化,恕不另行通知。 | ||
Specifications subject to change without notice for improvements and modifications | ||
(二)BROTHER S500Z1加工中心CNC参数 | ||
项目Item | S500Z1 | |
CNC装置形式CNC device form | CNC-C00 | |
移动量Mobility | X轴 X axis | 500mm |
Y轴 Y axis | 400mm | |
Z轴 Z axis | 300mm | |
工作台面至主轴断面的距离 | 180-480mm | |
工作台Worktable | 工作台面积Worktable area | 600×400mm |
最大载重量(均一载重) Maximum load weight (uniform load) | 250kg(300kg) | |
主轴spindle | 主轴转数spindle speed | 10,000min-1规格:10-10,000min-1 16,000min-1规格(选配):16-16,000min-1 |
10,000min-1高扭矩规格(选配):10-10,000min-1 27,000min-1高扭矩规格(选配):27-27,000min-1 | ||
攻丝加工时主轴最高速度 Maximum spindle speed in tapping | MAX6,000min-1 (27,000min-1规格 MAX8,000min-1) | |
主轴锥孔Spindle cone hole | 7/24BTNO.30 | |
BT二面约束主轴BT two plane constraint spindle | 选项(16,000min-1、27,000min-1规格时不能选择BT两面拘束主轴) | |
中心出水CTS Central effluent CTS | 选项(27,000min-1规格时不能选择CTS) | |
进给速度 feed speed | 快速进给速度XYZ轴rapid feed speed | 50×50×56m/min |
切削进给速度cutting feed rate | X,Y,Z轴:1-30,000mm/min | |
工具交换装置Tool switching device | 刀柄型号Handle model | MAS-BT30 |
拉钉规格Nail specification | MAS-P30T-2 | |
刀具存储数量Tool storage quantity | 14/21把 | |
刀具最大长度Maximum tool length | 250mm | |
刀具最大直径Maximum tool diameter | 110mm | |
工具最大重量Maximum weight of tools | 3.0kg/把(总重量25kg/14把,总质量35kg/21把) | |
工具选择方式Tool selection | 随机就近Random near | |
工具交换时间Tools exchange time | Tool to Tool | 0.8sec |
Chip to Chip | 1.4sec | |
Cut to Cut | 1.2sec | |
马达motor | 主轴马达(10分/连续)Spindle motor (10 mins / continuous) | 10,000min-1规格:10.1/6.7KW 16,000min-1规格(选配):7.4/4.9KW |
10,000min-1高扭矩规格(选配):12.8/8.8KW 27,000min-1高扭矩规格(选配):8.9/6.3KW | ||
进给轴电机Feed shaft motor | 1.0KW(X,Y) 2.0KW(Z) | |
所要动力源The source of power | 电源electrical source | AC200V±10%.50/60Hz±1Hz |
电源容量(连续)Power capacity (continuous) | 10,000min-1规格:9.5KVA 16,000min-1规格(选配):9.5KVA | |
10,000min-1高扭矩规格(选配):10.4KVA 27,000min-1高扭矩规格(选配):9.5KVA | ||
气压源 常用气压Barometric pressure in common use | 0.4-0.6MPA(参考值0.5MPA) | |
气压源 所要流量Flow of pressure source | 45L/min(27,000min-1规格:115L/min) | |
机器尺寸Machine size | 机器高度Machine height | 2497mm |
所需占地面积(包括控制箱打开部分)Required area | 1,560×2,220mm[2,692mm] | |
机器重量(包括控制装置防溅挡板)Machine weight | 2250kg | |
精度accuracy | 轴的双向定位精度(ISO230-2:2008) | 0.006-0.020mm |
Bi-directional positioning accuracy of shaft |
| |
轴的双向重复定位精度(ISO230-2:2008)Bi-directional repetitive positioning accuracy of shaft | <0.004mm | |
正面门规格Front door specification |
| 2扇门2 doors |
标准附件Standard appendage | 地脚螺栓/4个、水平地脚/4个、防溅挡板(手动门2扇)Anchor bolts / 4, horizontal feet / 4, splash guards (manual door 2 fans) | |
(三)COMAU机器人Racer 1.4 | ||
规 格Specification | 参 数 Parameters | |
控制轴数Control axis number | 6轴 | |
前端最大载重Front maximum load | 7kg | |
最大回转半径Maximum radius of rotation | 1650mm | |
一轴运动范围(速度)First axis motion range (velocity) | +/-165°(220°/S) | |
二轴运动范围(速度)Second axis motion range (velocity) | -85°/+155°(250°/S) | |
三轴运动范围(速度)Third axis motion range (velocity) | 0°/-168°(300°/S) | |
四轴运动范围(速度)Fourth axis motion range (velocity) | +/-210°(550°/S) | |
五轴运动范围(速度)Fifth axis motion range (velocity) | +/-135°(550°/S) | |
六轴运动范围(速度)Sixth axis motion range (velocity) | +/-2700°(600°/S) | |
重复定位精度Repeatable positioning accuracy | 0.05 | |
安全防护等级Safety protection grade | IP65 | |