img

TX85 Automation

TX-85 turret lathe, equipped with a truss manipulator, as a model application of medium-sized precision CNC machine tools, on the basis of maintaining the high speed and stability of the original truss manipulator, the clamping load of the manipulator claw is increased to satisfy the clamping of 2kg workpiece Holding and clamping positioning. The external truss has a large space, which can be used to carry multiple flexible peripheral equipment such as multi-layer silos, disc silos, and conveyor belts. It can also meet the addition of multiple auxiliary tasks such as off-machine inspection and cleaning, which minimizes the workload of operators , Improve production efficiency, and ensure automated and stable production.

Performance Characteristics
Technical Parameter
Typical Parts
Processing Video
  • 1.Dovetail sliding guide

    1.png

    X/Z—axis guide rail adopts the high quality cast iron with quenching, grinding and scraping treatment, which will prolong the precision retaining period of the guide ail surface and keep the stable Precision of machine tool for a long time.

  • 2.High-precision spindle

    图片2.png

    The shafts are made of quality material meterial and have been subjected to multiple heat treatments and exquisite machining,The bearings adopt original precision bearings from japan ,The waterproofs adopt special high lever waterproof rings from German.

    cp_xntd_xknctx75d_2_2@2x.png

    Special configuration can be used built-in motorized spindle,XKNC-TX-85D built-in motorized spindle has a rated spindle speed of 8000rpm and adopts oil heat exchanger in cooling, ensures high speed and high accuracy of the spindle. It is suitable for workpiece machining with high requirements of accuracy and surface smooth finish. And it increases the production efficiency vastly.

  • 3.Turret structure

    Slot cutter

    cp_xntd_xknctx85d_3_2@2x.png

    TX-85 equipped with 12 installation positions groove tool plate which adopts servo motor driven, rapid tool exchange, silence, big torque and precise positioning which meet the heavy cutting demands.

  • 4.Tailstock center

    2.5.1顶尖.jpg

    2.5.2顶尖.jpg

    Replaceable light weight rotary center made in Japan is adopted in this machine, connected to the machine via Morse taper shank No.2. It can be readily installed and operated, suitable for high speed and high precision cutting for general axle and long axle stocks and featured with good stability and difficult to wear.

项目Item

TX85

加工能力Capacity

最大加工直径(夹具工件)Max. machining diameter(Chuck work)

Ф110mm

最大加工直径(棒材)Max. machining diameter(Bar work)

Ф42mm

最大加工长度(配夹头)Max. machining length(Collet work)

180mm

主轴Spindle

主轴速度Spindle speed

Max.5000rpm

主轴通孔直径Through hole diameter

Ф43mm

回转速度变换Number of speed ranges

无级(S指令)

Steplessly(S instructions)

主轴中心高度Height from floor to spindle center

1053mm

快进速度Rapidly travel

X轴快进速度X-axis rapid traverse

15m/min

Z轴快进速度Z-axis rapid traverse

15m/min

刀塔Knife tower

刀具数量Tool number

12把

刀盘The knife dish

槽刀盘

动力刀具Rotary tools

最高转速Max.speed

Max.6000rpm

行程Stroke

X轴移动量X-axis travel

125mm

Z轴移动量Z-axis travel

305mm(夹头Collet)/ 

260mm(卡盘Chuck)

尾座调整范围Adjustment range of rear holder

125mm

顶尖移动行程Tip travel

45mm

电机Motors

主轴伺服电机Spindle servo motor

7.5/11KW

进给轴(X/Z)电机Feed servo motors

1.2KW

刀塔动力刀电机Turret power tools

-

刀塔分度电机Turret  indexing motor power

1.2KW

其它Etc

总电气容量Required electric power

15KVA

机床尺寸(长×宽×高)Floor space

15KVA

机床重量Mass of machine

约2600kg

型号Model

ATM03

搭载机床Equipped with Machine Tool

TX-85

控制系统Control System

PLC+HMI

控制轴数Controlled Axis

2轴(可扩展为4轴)2-Axis

ZL轴行程Stoke of ZL axis

非标定制

YL轴行程Stoke of YL axis

500mm

水平轴最大进给速度Max.feed speed at horizontal axis

80m/min

垂直轴最大进给速度Max.feed speed at vertical axis

80m/min

水平轴电机Motor at horizontal axis

0.75KW

垂直轴电机Motor at vertical axis

0.75KW

最大载荷Payload

2kg

装卸零件最大尺寸Max.size for assembling and unassemlied parts

Φ100mm

装卸零件最短时间Min. time for assembling and unassemlied parts

10.5s

手动操作速度Manual speed

0~100%可调

自动操作速度Automatic operation

0~100%可调

周围运行环境Ambient Conditions

温度Ambient temperature℃

0℃~+40℃

湿度Humidity

20至85%RH(不结露)

电器容量Power Supply

AC380V ±10%,50Hz,6KVA

           *由于产品不断更新,产品规格如有变化,恕不另行通知。

Specifications subject to change without notice for improvements and modifications


VIEWO LIST

  • Figure

    行星齿轮Planetary gear

    https://cdn.nagashima-seiko.com/uploads/20210316/fa2bc0b87d88e483e7d2ddcb0a0e7851.mp4
imh
Navigation Bar
img
img