20GL
The 20GL series is a small precision CNC lathe developed by integrating years of experience in CNC machine tool design and cutting-edge science and technology from Xi’an Beicun Company. It has the characteristics of low cost and space saving, and is known for its high rigidity and high precision. It is most suitable for precision machining of high-quality small parts. The humanized design makes the operation simple and easy to maintain. The standard configuration of NC language can be flexibly combined with all series of CNC machine tools of Beicun Company for automated production line, which completely subverts the traditional concept of human and machine operation, greatly improves production efficiency and reduces unit product cost.
1.Dovetail sliding guide

Guide rail adopts the high quality cast iron with quenching, grinding and scraping treatment, which will prolong the precision retaining period of the guide ail surface and keep the stable Precision of machine tool for a long time.
2.High-precision spindle

The shafts are made of quality material meterial and have been subjected to multiple heat treatments and exquisite machining,The bearings adopt original precision bearings from japan ,The waterproofs adopt special high lever waterproof rings from German
3.Easy to operate and maintain

Wedge-shaped design of guide rail panel on X axis/ Z axis is favorable to precision adjustment and recovery. Humanized design of preposing CRT operation panel is convenient for the user's operation. Sliding door of machine tool is designed in three-poinl support which will make the operation more stable and smoother。
4.Modular servo manipulator

Servo manipulator YL axis , ZL axis , adopts modular design concept, realizes automatic loading and un-loading fast assembly . Servo manipulator designs equipped with position adjustment device, it can realize X axis direction manipulator whole body adjust. And also can fast adjust the manipulator according to different workpiece in the machine tool positions like side of machining area, side of storage device and un-loading device.
5.General control system


Take standard as general control system, design humanization interface, accord with operating habits. System can back to zero, single move, manual (continuous and dynamic), automatic and multiple operating modes, can meet the functional requirements of machine tool, manipulator in different states.
6.System security protection

The system has the function of safety protection for the operation of the manipulator. Manipulator can only work in nominated area which reduce the damage to machine tool due to the operate by error. System modules have the power to keep the function to ensure the safety of processing data, The YL axis uses the gravity shaft motor with the brake to avoid the fall of the shaft caused by the excessive brake action time.
7.Fast loading and unloading, time-saving manipulator

Spindle end un-loading workpiece min. time 7.5s, manipulator highest moving speed 60m/min, it can decrease the un-loading auxiliary time, prevent the long waiting time after workpiece being produced and increased the machine tool working efficiency.
8.safe and stable

Automatic production efficiency stable which will not fluctuate due to operator reasons. It can prevent workpiece failure and other potential problems due to operator tired. During the Machine tool production, operator can test all the key positions accuracy and settings, turnover, does not need specific person to handle which reduced the working procedures. The machine decreases the working abilities and labor, and further reduce and labor cost, Enhance the enterprise image and prepare for the future equipment improvement.
9.A variety of automation equipment options

Multi-layer blank parts storage device

Matrix blank parts storage device

Disc blank parts storage device

Vibrating blank parts storage device

Loading/Un-loading device

Phase detecting device

Wide-belt part transferring device
Multi-layer blank parts storage device, Matrix blank parts storage device, Disc blank parts storage device, Vibrating blank parts storage device, etc. Loading/Un-loading device, Phase detecting device. Wide-belt part transferring device.
10.Reasonable gang tool structure

The machine is equipped with the proper mutation structure and sufficient tool installation space.the precise machining tools for driling thread tapping,internal boring turning threading and cutting can be installed in the tool post.
11.Variety of automatic clamp opening and closing and clamping device options

Spring stirrer clamping mode

The shift type clamping mechanism

power chuck

The air rotary cylinder
The shift type clamping mechanism which is well known for its high speed and steadiness is a standard accessory. And spring collet clamping mode is also used for machine tools. It is convenient to adjust the clamping force and exchange the collet. Precision air chuck clamping mode is an optional accessory. Comparing with the spring collet clamping mode, it bears much more strength in clamping force, accuracy, and clamping range.

12.Powerful AC Servo Motor

Far the main shaft drive, we have provided a step-less speed change by means of a 3.7KW AC servo motor. In addition, we have adopted a mainterance-free digtal AC servo for each spindle feed motor.
13.Processing accuracy is within 0.2μm
Processing conditions
Machined material:HpbS9-l
Spindie speed:3000rpm
Feed :0.03 mm/rev
Cutting depth:0.1mm(radijs diameter)
Too used: Com pax diamond
processing precision example

Through the adoption of super precise angular main bearing for the main snaft bearing it has been possible to acnieve high speed high precision Processing within 0.2μm for both round ness and surface Precision.
(1)机械本体标准规格MACHINE SPECIFICATIONS | ||
项目Item | 20G参数20G Parameter | |
加工能力Capacity | 床身上最大回转直径Swing over bed | Ф240mm |
刀座底板上回转直径Swing over cross slide | Ф120mm | |
最大加工直径Max. machining diameter | Ф100mm | |
最大加工长度Max. machining length | 100mm | |
主轴Spindle | 主轴速度Spindle speed | MAX.6000r/min |
主轴通孔直径Through hole diameter | Ф20mm | |
回转速度变换Number of speed ranges | 无级Step-less | |
主轴中心高度Height from floor to spindle center | 900mm | |
弹簧夹头柄径Spring collet shank diameter | Ф26mm | |
快进速度Rapidly travel | X轴快进速度X-axis rapid traverse | 15m/min |
Z轴快进速度Z-axis rapid traverse | 15m/min | |
行程troke | X轴移动量X-axis travel | 200mm |
Z轴移动量Z-axis travel | 180mm | |
电机Motors | 主轴电机Spindle servo motor | 2.2/3.7 KW |
进给轴(X/Z)电机Feed servo motors | 0.75KW | |
其它Etc | 总电气容量Required electric power | 6KVA,AC200V,50Hz |
机床尺寸(长×宽×高)Floor space | 约1100x1050x1470mm | |
机床重量Mass of machine | 约750kg | |
型号Model | DAH-960-390 | |
搭载机床Equipped with Machine Tool | OBOT-20GL | |
控制系统Control System | PLC+HMI | |
控制轴数Controlled Axis | 2轴(可扩展为4轴)2- Axis | |
ZL轴行程Stoke of ZL axis | 960mm | |
YL轴行程Stoke of YL axis | 390mm | |
水平轴最大进给速度Max.feed speed at horizontal axis | 80m/min | |
垂直轴最大进给速度Max.feed speed at vertical axis | 75 m/min | |
水平轴电机Motor at horizontal axis | 2.0KW | |
垂直轴电机Motor at vertical axis | 0.75KW | |
最大载荷Payload | 0.5kg | |
装卸零件最大尺寸Max.size for assembling and unassemlied parts | D60mm | |
装卸零件最短时间Min. time for assembling and unassemlied parts | 12s | |
手动操作速度Manual speed | 0~100%可调 | |
自动操作速度Automatic operation | 0~100%可调 | |
周围运行环境Ambient Conditions | 温度Ambient temperature℃ | 0℃~+40℃ |
湿度Humidity | 20至85%RH(不结露) | |
电器容量Power Supply | AC380V ,50Hz,6KVA | |
(2)CNC装置标准规格CNC UNIT SPECIFCATIONS | ||
控制系统Control unit | FANUC 0i TF | |
控制轴数Controlled axis | 同时2轴(X/Z)、手动1轴 | |
Simultaneously controllable 2axis, 1axis in manual mode | ||
输入方式Input system | MDI键入、绝对/增量编程 | |
MDI keyboard input、combined use of absolute/incremental programming | ||
程序记忆容量Part program storage length | 512KB | |
插补功能Interpolation function | 直线、锥面、圆弧、车螺纹 | |
Linear interpolation、pyramidal interpolation、Circular interpolation、threading interpolation | ||
最小设定单位Minimum Setting | X:0.0001mm(直径dia.) Z:0.0001mm | |
最小移动单位Minimum Travel Setting | X:0.0005mm Z:0.001mm | |
切削进给速度Feed rate | 1~10000mm/min | |
刀具补偿设定Tool offset | 64组64 Group | |
辅助机能Auxiliary functions | M2、S4、T4 | |
停顿时间Dwell time | 0~99999.999s | |
工进倍率Feed rate override | 0~150% | |
快进倍率Rapid traverse override | F0、25、50、100% | |
输入输出接口Input/Output interface | RS232C/CF卡/USB | |
显示语言Display language | 中文、英语、日语Chinese、English、Japanese | |
VIEWO LIST
20GL产品视频