VTC-40C Automation
Three XKNC VTC-40C small vertical machining centers are used for parts processing; the flow of parts between the feeding/receiving mechanism and the machine tool is completed by a Comau 60 kg NJ60-2.2 robot with an end effector; The storage of blanks and finished products is completed by a set of accumulation conveying mechanism; the scheme adopts a one-to-three layout, that is: one robot automatically loads and unloads three processing centers;
1.零件加工

XKNC-VTC40C
The machining of the parts is processed by the Bukchon XKNC-VTC40C machining center. The machine has 14 tool magazines. The item exchange is the tool body without moving, the tool exchange is fast and reliable, and the preparation time is greatly shortened. The high-speed spindle maintains stable precision even under high-speed cutting.
2.Machine tool clamping

The machine tool clamp adopts special hydraulic clamp. The clamp can clamp two workpieces at a time. The workpiece clamping direction is basically the same as that on the feeding tray. When the robot puts the blank into the fixture, the fixture automatically takes the part. Push to the positioning surface and clamp.
3.Material flow

Comau NJ60-2.2 robot
The flow between the machine and the storage mechanism is completed by the Comau 60 kg NJ60-2.2 robot with the end effector. The robot firstly grabs the finished parts on the machine and puts it into the finished product of the accumulation transmission mechanism. The tray is collected, and then 2 blanks are grabbed on the feeding tray for feeding the machine. At this point, both the feed conveyor and the finished conveyor are moved forward one station, and the next tray is ready for the next automatic loading and unloading.
The robot cooperates with the accumulation transmission mechanism to automatically feed three machining centers at the same time.
4.Compact layout

Three XKNC KIRA-VTC-40C mini vertical machining centers are used for part processing; the flow between parts in the feeding/receiving mechanism and the machine tool is completed by a Comau 60 kg NJ60-2.2 robot with end effector. The storage of parts blanks and finished products is completed by a set of accumulation conveyors; the scheme adopts a one-to-three layout, that is, one robot automatically feeds and unloads three machining centers;
5.Blank supply

Accumulative transmission mechanism

Accumulative transmission mechanism
The automatic feeding of the part blank is completed by a stacking transfer mechanism. The mechanism is divided into 4 transport lanes, 2 of which are responsible for blank feeding, and the bottom rotating system drives the pallet to move, and each tray can be placed 2 Parts.
The agency, in conjunction with the Comaudo articulated robot, can automatically feed three machining centers simultaneously.
(1)机械本体标准规格MACHINE SPECIFICATIONS | |||
项目Items | 参数Parameter | ||
刀库Magazine tool | 刀库容量Magazine tool capacity | 14把 | |
自动换刀形式Automatic tool change form | 自动Automatic | ||
刀柄规格Tool holder spec | MAS-BT40 | ||
拉钉规格Blind rivet spec | MAS-P40T-1 | ||
最大刀具长度Max.tool length | 250mm | ||
最大刀具直径Max.tool diameter | 100mm | ||
最大刀具重量Max.tool weight | 4kg | ||
换刀时间(T-T)Tool to tool(T-T) | 1.6sec | ||
换刀时间(C-C)Tool to tool(C-C) | 3.2sec*1 | ||
主轴Spindle | 主轴最高转速Max.spindle rotate speed | MAX.6000r/min | MAX.10000r/min |
最大攻丝速度Max.tapping speed | 4000r/min | ||
主轴孔锥度Spindle hole conical degree | BT40 7:24 | ||
工作台Workbench | 工作台载重Workbench load | 300kg | |
工作台尺寸(长×宽)Workbench size(L×W) | 800mm×400mm | ||
速度Speed | 快移速度(X/Y/Z)Rapid traverse speed(X/Y/Z) | X/Y轴:36m/min Z轴:48 m/min | |
X/Y axis:36m/min Z axis:48 m/min | |||
切削进给速度(X/Y/Z)Cutting feed speed(X/Y/Z) | Max. 10m/min | ||
精度Precision | X/Y/Z定位精度X/Y/Z Positioning accuracy | ±0.005mm(全行程)*2 | |
X/Y/Z重复定位精度X/Y/Z Repeated Positioning accuracy | ±0.003mm*2 | ||
行程Travel | X轴行程X-axis travel | 700mm | |
Y轴行程Y-axis travel | 470mm | ||
Z轴行程Z-axis travel | 400mm | ||
主轴端面至工作台面距离Distance from spindle and face to workbench | 155mm-555mm | ||
驱动电机Driving Motor | 主轴伺服电机Spindle servo motor | 5.5/7.5KW | |
进给(X/Y/Z轴)伺服电机Feed servo motors | X/Y轴:1.8kw Z轴: 2.7kw | ||
X/Y axis:1.8kw Z axis: 2.7kw | |||
冷却Cooling | 冷却泵流量Cooling pump flow | 120L/min | |
其它Etc | 总电气容量Required electric power | 15KVA, AV200V±10%,50HZ | |
气源压力Air source pressure | 0.4MPa | ||
气源流量Air source flow | 100NL/min | ||
机床尺寸(长×宽×高)Floor space(L×W×H) | 2627mm×1959mm×2780mm | ||
机床重量Machine tool weight | 约2620kg | ||
型号Model | RB20 | ||
手臂形式Type | 水平多关节(SCARA) | ||
控制轴数Controlled Axis | 4轴 4- Axis | ||
伺服系统Servo System | 全数字交流伺服系统 | ||
最大负载能力Payload | 20kg | ||
最大回转半径 MAX turning radius | 1200 mm | ||
动作范围Range of Motion | 直线轴(3 轴)UP/DOWN | 570 mm | |
大臂转轴(1轴)Lower arm | ±90° | ||
小臂转轴(2 轴)Upper arm | ±116° | ||
腕部旋转(4 轴)Wrist twist | ±720° | ||
最高速度Maximum Speed | 直线轴(3 轴) UP/DOWN | 12.5m/min | |
大臂转轴(1轴)Lower arm | 150°/ s | ||
小臂转轴(2 轴)Upper arm | 150°/ s | ||
腕部旋转(4 轴)Wrist twist | 600°/ s | ||
允许扭矩 Allowable Moment | 大臂转轴(1轴)Lower arm | 675.5 Nm | |
小臂转轴(2 轴)Upper arm | 193.6 Nm | ||
腕部旋转(4 轴)Wrist twist | 31.75 Nm | ||
允许惯性矩 Allowable Inertia | 大臂转轴(1轴)Lower arm | 13.05 kg.m2 | |
小臂转轴(2 轴)Upper arm | 1.03 kg.m2 | ||
腕部旋转(4 轴)Wrist twist | 0.0276 kg.m2 | ||
重复定位精度 Repeatability | 单位(mm) | ±0.1 mm | |
本体重量 Weight | 300kg | ||
周围运行环境Ambient Conditions | 温度 Ambient temperature℃ | 0℃~+40℃ | |
相对湿度Humidity | 20至85%RH(不结露) | ||
其他Others | ●避免易燃、腐蚀性气体、液体Free from corrosive gasses or liquids, or explosive gasses | ||
●勿溅水、油、粉尘等 | |||
Clean and dry | |||
●远离电器噪音源(等离子) | |||
Free from excessive electrical noise (plasma) | |||
(2)CNC装置标准规格CNC UNIT SPECIFICATIONS | |||
项目Items | 内容Contents | ||
控制系统Control unit | FANUC 0i mate MD | ||
控制轴数Controlled axis | 最大控制轴数4轴,同时控制3轴Number of max. control axises:4axises number simultaneous control axises | ||
输入指令Input instruction | 最小设定单位:0.001mm Minimum Setting: 0.001mm | ||
最小移动单位:0.001mm Minimum Travel Setting: 0.001mm | |||
绝对/增量指令Absolute/incremental code | |||
VIEWO LIST
骏捷项目Junjie Project