KVC700D
KVC700D is a small vertical machining center independently researched and developed by our company. It has a C-shaped layout and a cross slide structure. The worktable moves back and forth (Y-axis) with the slide, and the worktable moves left and right (X-axis) on the slide. The spindle box moves up and down along the column guide rail (Z axis). The spindle is directly connected to the motor, with 24 disc-type tool magazines and BT40 tool holders hanging on the side. The machine runs reliably, has high machining accuracy and efficiency, and is convenient for maintenance. This machine tool is especially suitable for the processing of small and medium-sized parts in the industries of mobile phones, computers, cameras, automobiles, and motorcycles, as well as the processing of other general-purpose parts.
1.Bed column

2.Spindle adopts direct connection structure

The main shaft adopts a direct connection structure, and uses imported well-known brand high-precision main shaft bearings, high speed, high precision, high rigidity, low noise, and maintenance-free;
3.The X, Y, and Z axes are driven by high-rigidity roller linear guides and ball screws


The X, Y, and Z axes are driven by high-rigidity roller linear guides and ball screws to keep the position accuracy and dynamic response speed at a high level;
4.Servo drive tool magazine

The tool magazine of the tool magazine is driven by a servo drive, which enables rapid tool selection and fast tool change;
5.Large slope rear chip removal

The chip is discharged after a large slope, and it is matched with a large flow chip pump, so that the chip is discharged smoothly without accumulation;
6.operating system

7.Optional turntable

(一)主机规格 Machine Specifications | ||
项目Item | 参数 Parameter | |
主轴 Spindle | 主轴锥度 Spindle hole conical degree | 7/24 No.40 |
主轴转速 Max. spindle rotate speed | 8000 | |
最大攻丝速度 Max. tapping speed | 4000r/min | |
主轴电机 Spindle motor | 7.5/11KW | |
X 轴 X-axis | 行程 Travel | 700mm |
最高移动速度 Rapid traverse speed | 36m/min | |
切削进给速度 Cutting feed speed | 10 m/min | |
Y 轴 Y-axis | 行程 Travel | 500mm |
最高移动速度 Rapid traverse speed | 36m/min | |
切削进给速度 Cutting feed speed | 10 m/min | |
Z 轴 Z-axis | 行程 Travel | 550mm |
最高移动速度 Rapid traverse speed | 36m/min | |
切削进给速度 Cutting feed speed | 10 m/min | |
刀库 Magazine tool | 刀柄锥度 Tool holder spec | BT40 |
拉钉型号 Blind rivet spec | MAS-P40T-1 | |
刀具总数 Magazine tool capacity | 24把 | |
单个刀具的最大重量 Max. tool weight | 8kg | |
刀具总重量Total weight of tools | ≤120kg | |
刀具的最大直径 Max. tool diameter | Φ150mm(邻空刀) | |
刀具最大长度 Max. tool length | 300mm | |
换刀时间(T-T) | 1.36Sec | |
换刀时间(C-C) | 4.4Sec *1 | |
机床加工能力 Machine processing capacity | 钻孔 Drilling | Φ30mm |
攻丝 Tapping | M27 | |
铣削 Milling | 120cm3/min | |
精度 Accuracy | 定位精度 Positioning accuracy | 0.005 mm(全行程)*2 |
重复定位精度 Repeatability positioning accuracy | 0.003 mm *2 | |
电气总容量 Required electric power | 15 KVA,AC200V±10%,50HZ | |
气源 Air source | 0.4MPa 100NL/min | |
冷却油箱容积Cooling tank volume | 200L | |
机床外形尺寸 Floor space | 2707*1930*2980 mm3 | |
机床重量 Mass of machine | 约4000Kg | |
*1说明:基于JIS B6336 9:2002测定 | ||
(二)数控系统规格 CNC System Specification | ||
数控系统 Control system | FANUC 0i MF | |
最多控制轴数 Max.controlled axis | 5轴 5Axis | |
最多同时控制轴数 Maximum number of master control shafts | 4轴 4Axis | |
输入方法 Input system | MDI输入,绝对值/增量值 MDI input, absolute value/increment value input | |
程序存储器容量 Part program storage length | 512Kbyte | |
插补功能 Interpolation function | 直线插补、圆弧插补、螺旋插补Linear interpolation, circular interpolation, helical interpolation | |
最小检测单位 Minimum testing unit | 0.0001mm | |
最小移动单位 Least command increment | X轴 X-axis | 0.001mm |
Y轴 Y-axis | 0.001mm | |
Z轴 Z-axis | 0.001mm | |
刀具位置补偿 Tool position compensation | 形状补偿 Shape compensation | ±99999.999mm |
磨损补偿 Wear compensation | ± 9.999mm | |
手轮移动倍率 Hand wheel rotation ratio | 0.1/0.01/0.001mm | |
切削进给倍率 Cutting traverse override | 0~150% | |
快速进给倍率 Rapid traverse override | F0,25,50,100% | |
数据通信接口 Data communication interface | CF卡接口,以太网接口,USB接口 CF card interface, Ethernet interface, USB interface | |
刀具补偿数 Tool offset | 400个 400pcs | |
登录程序个数 Number of login programs | 400个 400pcs | |
显示语言 Display language | 中文(15种可选)Chinese (15 optional) | |
*由于产品不断更新,产品规格如有变化,恕不另行通知。 | ||