VTC-40C
The small vertical machining center VTC-40C produced in Xi'an adopts the original high-speed and high-precision spindle and the internationally-used BT40 tool holder. The VTC-40C is equipped with 14 tool magazines controlled by servo motors and has excellent acceleration and deceleration performance; the whole machine runs Reliable, easy to maintain and repair. The reasonable mechanical structure design and the large base and column casting structure ensure the high rigidity of the machine tool. The full width of the feed joint surface can ensure stable heavy cutting and high-speed and high-precision machining.
1.Stable mechanical structure

Reasonable mechanical structure, large size base and stand column casting construction, and feed faying face with full width may ensure stable heavy cutting and high-speed and high-precision processing.Apply appropriate lubricant oil on the main parts and devices for mechanical operation to extend mechanical lift, reduce maintenance guarantee cost and cut down maintenance time.
2.High-speed and high-precision spindle

High speed spindle may maintain high precision even under long-time high-speed cutting.
Spindle is with easily replaced design, and can be installed with oil cooler (optional) decreasing thermal deformation.
3.Perfect tool exchange method

No movement of magazine tool is needed for 14 pieces tool magazine, which may provide reliable and quick tool exchange by shortening preparation time.Magazine tool rotating shaft is controlled by servo motor with excellent acceleration and deceleration performance.Small gap, high rigidity transmission mechanism is reliable in operation and easy to maintain and repair.
4.Operating system FANUC Oi-TF

1. Achieve high-speed, high-quality processing with powerful control functions;
2. Pursuit of more convenient use, rich CNC functions and excellent operability;
3. High operating efficiency: Reliable hardware is used to ensure stable application in harsh environments; powerful diagnostic and maintenance functions make it easy to determine the location of the fault and shorten the repair time to improve efficiency;
5.Worktable size and processing range

Maximum range of work
Broad range of work will improve working ability to the maximum。
dimension of worktable:800mm×400mm
X axis travel:700mm
Y axis travel:500mm
Z axis travel:400mm
6.Column heightening

Increase the scope of work.
7.Electric cabinet air conditioner

The large wind control box temperature control machine can effectively prevent the damage of electrical components caused by the intrusion of dust, moisture, dust and harmful gases, so that the electrical components can exert their maximum operating efficiency and prolong the service life.
8.Hollow screw cooling function

The accuracy of the machine tool transmission is guaranteed, which guarantees high-precision machining.
9.Cooling in the spindle

Increases cooling and chip breaking capacity for increased efficiency.
10.Cutting oil device

It is used to store the coolant and is equipped with a cooling pump to achieve circulation of the coolant circuit.
11.Oil mist collection device

Reduce pollution and improve the working environment.
12.The large workbench area can correspond to a variety of fixture installation methods

Worktable can be installed with the optional accessories 4th rotary table and 5th rotary table to enlarge the working application, the variety installation methods will meet all kinds of the manufacturing demands.
13.Folding structure design of machine tool door

The folding structure of the machine door is designed, and the large opening and closing door space is convenient for operation and workpiece loading and unloading.
14.Chip flushing device

Chip removal flushing device is with strong chip removal capacity.
15.Chip conveyor

The iron scraps produced by the parts are automatically discharged out of the machine and are suitable for automatic machining and large chips.
(一)主机规格 Machine Specifications | |||
项目Item | VTC-40C 参数 Parameter | ||
低速 Low speed | 高速 High speed | ||
主轴 Spindle | 主轴锥度 Spindle hole conical degree | 7/24 No.40 | |
主轴转速 Max. spindle rotate speed | 6000 r/min | 10000 r/min | |
最大攻丝速度 Max. tapping speed | 4000r/min | ||
主轴电机 Spindle motor | 5.5/7.5KW | ||
X 轴 X-axis | 行程 Travel | 700mm | |
最高移动速度 Rapid traverse speed | 36m/min | ||
切削进给速度 Cutting feed speed | 10 m/min | ||
Y 轴 Y-axis | 行程 Travel | 500mm | |
最高移动速度 Rapid traverse speed | 36m/min | ||
切削进给速度 Cutting feed speed | 10 m/min | ||
Z 轴 Z-axis | 行程 Travel | 400mm | |
最高移动速度 Rapid traverse speed | 48m/min | ||
切削进给速度 Cutting feed speed | 10 m/min | ||
刀库 Magazine tool | 刀柄锥度 Tool holder spec | BT40 | |
拉钉型号 Blind rivet spec | MAS-P40T-1 | ||
刀具总数 Magazine tool capacity | 14把 | ||
单个刀具的最大重量 Max. tool weight | 4kg | ||
刀具的最大直径 Max. tool diameter | Φ100mm | ||
刀具最大长度 Max. tool length | 250mm | ||
换刀时间(T-T) | 1.6Sec | ||
换刀时间(C-C) | 3.2Sec *1 | ||
机床加工能力 Machine processing capacity | 钻孔 Drilling | Φ20mm | Φ16mm |
攻丝 Tapping | M18 | M12 | |
铣削 Milling | 20cm3/min | 10cm3/min | |
精度 Accuracy | 定位精度 Positioning accuracy | 0.005 mm(全行程)*2 | |
重复定位精度 Repeatability positioning accuracy | 0.003 mm *2 | ||
电气总容量 Required electric power | 15 KVA,AC200V±10%,50HZ | ||
气源 Air source | 0.4MPa 100NL/min | ||
冷却油箱容积Cooling tank volume | 200L | ||
机床外形尺寸 Floor space | 2707X1830X2807 mm3 | ||
机床重量 Mass of machine | 约3000Kg | ||
*1说明:基于JIS B6336 9:2002测定 | |||
(二)数控系统规格 CNC System Specification | |||
项目 Item | 参数 Parameter | ||
数控系统 Control system | FANUC 0i MF | ||
最多控制轴数 Max.controlled axis | 5轴 | ||
最多同时控制轴数 Maximum number of master control shafts | 4轴 | ||
输入方法 Input system | MDI输入,绝对值/增量值 | ||
程序存储器容量 Part program storage length | 512Kbyte | ||
插补功能 Interpolation function | 直线插补、圆弧插补、螺旋插补 | ||
最小检测单位 Minimum testing unit | 0.0001mm | ||
最小移动单位 Least command increment | X轴 X-axis | 0.001mm | |
Y轴 Y-axis | 0.001mm | ||
Z轴 Z-axis | 0.001mm | ||
刀具位置补偿 Tool position compensation | 形状补偿 Shape compensation | ±99999.999mm | |
磨损补偿 Wear compensation | ± 9.999mm | ||
手轮移动倍率 Hand wheel rotation ratio | 0.1/0.01/0.001mm | ||
切削进给倍率 Cutting traverse override | 0~150% | ||
快速进给倍率 Rapid traverse override | F0,25,50,100% | ||
数据通信接口 Data communication interface | CF卡接口,以太网接口,USB接口 | ||
刀具补偿数 Tool offset | 400个 | ||
登录程序个数 Number of login programs | 400个 | ||
显示语言 Display language | 中文(15种可选) | ||
*由于产品不断更新,产品规格如有变化,恕不另行通知。 | |||
VIEWO LIST
VTC-40C产品视频