XKNC-204
The 204 machine tool is a cost-effective precision CNC machine tool that has been improved and upgraded on the basis of the XKNC-203 series of small precision gang type machine tools that has been widely trusted and praised by the market. It inherits the high processing performance and easy operation of the original model. On the basis of this, a precision CNC machine tool with a fully enclosed protective design, larger operating space and easier adjustment and maintenance has been developed. Compared with traditional automatic lathes or special machine tools, it has the characteristics of high precision, easy operation, miniaturization and diverse processing functions, and it is easier to make corrections and adjustments. If equipped with feeding and reclaiming devices and special tooling fixtures, it can also meet higher-level processing requirements.
1.Dovetail sliding guide
High rigidity
With a hard rail structure, the contact surfaces are subjected to scraping, typically 12-14 points per square inch.

High precision
Material: HT300; high strength, good wear resistance, excellent overall design, excellent shock absorption.
The lead screw and bearing are imported brands, ensuring high speed and high precision operation, low heat and long life.
2.Reasonable gang tool structure

The machine is equipped with the proper mutation structure and sufficient tool installation space. the Precise machining tools for driling thread tapping, internal boring turning threading and cutting can be installed in the tool post.
3.High-precision spindle

The shafts are made of quality material meterial and have been subjected to multiple heat treatments and exquisite machining,The bearings adopt original precision bearings from japan ,The waterproofs adopt special high lever waterproof rings from German.
4.Variety of automatic clamp opening and closing and clamping device options

The shift type clamping mechanism

Spring stirrer clamping mode

The high speed rotary joint

Precision air chuck
The shift type clamping mechanism which is well known for its high speed and steadiness is a standard accessory. And spring collet clamping mode is also used for machine tools. It is convenient to adjust the clamping force and exchange the collet. Precision air chuck clamping mode is an optional accessory. Comparing with the spring collet clamping mode, it bears much more strength in clamping force, accuracy, and clamping range.
5.Easy to operate and maintain

X axis

Z axis
Wedge-shaped design of guide rail panel on X/Z axis is favorable to precision adjustment and recovery. Humanized design of preposing CRT operation panel is convenient for the user's operation. Sliding door of machine tool is designed in three-poinl support which will make the operation more stable and smoother。
6.Fully enclosed machine cover

Machine tool shell cover is toially- enclosed design with larger internal operation space and better protection, and if it is furnished with oil and mist collection device, the work environment will be better.
7.Operating system FANUC Oi-TF

1. Achieve high-speed, high-quality processing with powerful control functions;
2. Pursuit of more convenient use, rich CNC functions and excellent operability;
3. High operating efficiency: Reliable hardware is used to ensure stable application in harsh environments; powerful diagnostic and maintenance functions make it easy to determine the location of the fault and shorten the repair time to improve efficiency;
8.Oil mist collection device

Reduce pollution and improve the working environment.
(1) 主机规格 Host Specifications | |||
项目Item | 参数Parameter | ||
主轴Spindle | 通孔直径Through hole diameter | Φ20mm | |
最大夹持外径Max. machining diameter | Φ100mm | ||
最大加工长度Max. machining length | 100mm | ||
最高转速Max. Spindle speed | 6000 r/min | ||
电机功率Motor power | 3.7/5.5kW | ||
X 轴 X-axis | 行程travel | 200mm | |
最高移动速度rapid traverse | 15m/min | ||
功率Power | 0.75kW | ||
Z 轴Z-axis | 行程travel | 180mm | |
最高移动速度rapid traverse | 15m/min | ||
功率Power | 0.75 kW | ||
其他 Etc | 电气总容量Required electric power | 6 KVA | |
冷却油箱容积Cooling tank volume | 70L | ||
中心高Height from floor to spindle center | 950mm(地脚40mm) | 950mm(Foot margin40mm) | |
机床外形尺寸Floor space | 1230×985×1515 mm3 | 1230 × 985 × 1515 mm3 | |
机床重量Mass of machine | 约750Kg | About 750Kg | |
(2) 数控系统规格 CNC System Specification | |||
数控系统Control system | FANUC 0i TF | ||
控制轴数(各路径) Controlled axis | 同时2轴(X/Z)、手动1轴 | Simultaneously controllable 2axis, 1axis in manual mode | |
输入方法Input system | MDI输入,绝对值/增量值 | MDI input, absolute/incremental input | |
程序存储器容量Part program storage length | 512Kbyte | ||
插补功能Interpolation function | 直线插补、圆弧插补、极坐标插补、圆柱插补 | Linear interpolation、Circular interpolation、Polar coordinate interpolation、Cylindrical interpolation | |
最小检测单位Minimum testing unit | 0.0001mm | ||
最小移动单位Least command increment | X轴:0.0005mm | X-axis: 0.0005mm | |
Z轴:0.001mm | Z-axis :0.001mm | ||
Cs轴:0.001o | Cs-axis :0.001° | ||
刀具位置补偿Cutter location compensation | 形状补偿:±99999.999mm | Shape compensation:±99999.999mm | |
磨损补偿:± 9.999mm | Wear compensation:± 9.999mm | ||
手轮移动倍率Hand wheel movement ratio | 0.1/0.01/0.001mm | ||
切削进给倍率Cutting traverse override | 0~150% | ||
快速进给倍率Rapid traverse override | F0,25,50,100% | ||
数据通信接口Data communication interface | CF卡接口,以太网接口,USB接口 | CF card interface, Ethernet interface, USB interface | |
刀具补偿数Tool offset | 64组 | 64 Group | |
登录程序个数Number of login programs | 400个 | 400Pcs | |
显示语言Display language | 中文(15种可选) | Chinese (15 optional) | |
*由于产品不断更新,产品规格如有变化,恕不另行通知。 | |||
VIEWO LIST
XKNC-204产品视频