img

CHG Series

CHGX-1000A small precision center hole grinder, the devil's body moves up and down with a double V-shaped structure, and the tailstock body uses a dovetail-type structure to ensure the high rigidity and stability of the machine tool.

Performance Characteristics
Technical Parameter
Typical Parts
Processing Video
  • 1.Machine features

    ● The moving head of the devil head body adopts double V-shaped structure, and the tailstock body moves up and down by adopting a dovetail rail type structure to ensure high rigidity and stability of the machine tool.

    ● All rail surfaces and contact surfaces are manually scraped.

    ● The grinding head spindle adopts imported high-frequency electric spindle, which can realize 0~60000rpm stepless speed regulation through the frequency converter.

    ● The head of the devil head can be fed manually, or it can be automatically reciprocated.

    ● When the grinding wheel is trimmed, the diamond pen can move sideways back and forth in addition to the linear movement along the cone of the grinding wheel. Therefore, the grinding wheel is completely unaffected by the position and wear of the diamond pen.

    ● The workpiece clamping uses an automatic centering clamping device to simplify the clamping of the workpiece.

  • 2.operating system

    IMG_9930.JPG

    Operating system.

  • 3.Correction device

    IMG_9935 - 副本.JPG

    Correction device.

  • 4.Fine-tuning handwheel

    IMG_9927 - 副本.JPG

    Fine tuning hand wheel.

  • 5.Grinding head

    IMG_9934 - 副本.JPG

    The grinding head spindle adopts imported high-frequency electric spindle, and the inverter can realize 0~60000rpm infinitely variable speed.

  • 6.Rail structure

    The grinding head body moves up and down the guide rail adopts double V-shaped structure, and the tailstock body moves up and down by adopting a dovetail rail type structure to ensure high rigidity and stability of the machine tool.

项目Item

单位Unit

CHGX-1000A

工件规格Workpiece specification

工件外径Workpiece outer diameter

mm

Ф5~Ф125

工件长度Workpiece length

mm

80~1000

工件最大重量Maximum weight of the workpiece

kg

100

研磨能力Grinding ability

中心孔角度Center hole angle

度degree

60°

中心孔直径Center hole diameter

mm

Ф2~Ф40

电机功率Motor Power

研磨主轴电机Grinding spindle motor

kw

1.2

工件驱动电机Workpiece drive motor

kw

0.4

磨头体驱动电机Grinding head drive motor

kw

0.4

研磨主轴Grinding spindle

主轴头行程Spindle head stroke

mm

230

主轴头上下进给Spindle head up and down feed

mm

0.01/0.001/0.0001

研磨主轴转速Grinding spindle speed

rpm

0~60000(无级变速Continuously variable speed)

砂轮Grinding wheel

修砂行程(与上下轴向夹角30°)Sand repair stroke (30° angle with the     upper and lower axial directions)

mm

40

带柄砂轮直径Grinding wheel diameter

mm

Ф25

砂轮装夹方式Grinding wheel clamping method

 

ER16



imh
Navigation Bar
img
img